| Issue |
Wuhan Univ. J. Nat. Sci.
Volume 27, Number 2, April 2022
|
|
|---|---|---|
| Page(s) | 142 - 152 | |
| DOI | https://doi.org/10.1051/wujns/2022272142 | |
| Published online | 20 May 2022 | |
Mathematics
CLC number: TM732
Optimal Power Flow Calculation of Active Distribution Network Based on Improved Comprehensive Technology
1
College of Electrical Engineering and New Energy, China Three Gorges University, Yichang
443002, Hubei, China
2
Hubei Provincial Key Laboratory for Operation and Control of Cascade Hydropower Station, China Three Gorges University, Yichang
443002, Hubei, China
† To whom correspondence should be addressed. E-mail: liudb@ctgu.edu.cn
Received:
5
November
2021
Comprehensive unified power flow controller ( UPFC ) technology can calculate voltage control parameters of UPFC, but it increases the nonlinearity of Newton power flow calculation. When the comprehensive technology is combined with the intelligent algorithm, the control parameters can only be optimized through the active and reactive power of UPFC on the branch, which makes the optimization convergence worse. Therefore, an optimal power flow calculation method for active distribution network based on improved comprehensive technology is proposed. First, based on the analysis of the influence of UPFC on branch power flow, an improved UPFC model is proposed. The accuracy of UPFC control parameters is enhanced by adjusting the voltage phase angle and regulation radius of series side transformer. Second, the optimal control model considering UPFC is established. Finally, the corresponding self-admittance and mutual admittance elements are extracted from the constructed UPFC model and introduced into the Jacobian matrix, so that while the comprehensive technology maintains the dimension of the Jacobian matrix, the intelligent algorithm can directly optimize the control parameters to reduce the search space. The IEEE33 bus system is used for example simulation, the results before and after the improvement are compared, and the Monte Carlo method is used to calculate the two algorithms 50 times respectively based on the installation number of UPFC, which verifies that the proposed optimization method has better convergence and operation speed.
Key words: unified power flow controller (UPFC) / active distribution network / power flow calculation / optimal power flow / Jacobian matrix / comprehensive UPFC technique
Biography: CAO Hongji, male, Master candidate, research direction: active distribution network operation optimization. E-mail: 349082828@qq.com
Foundation item: Supported by the National Natural Science Foundation of China (51907104)
© Wuhan University 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (https://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.