EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 29 / No 5 (October 2024) Wuhan Univ. J. Nat. Sci., 29 5 (2024) 484-494 References
Open Access
Issue
Wuhan Univ. J. Nat. Sci.
Volume 29, Number 5, October 2024
Page(s) 484 - 494
DOI https://doi.org/10.1051/wujns/2024295484
Published online 20 November 2024
  1. Kawahara K, Kaneno Y, Kakitsuji A, et al. Microstructural factors affecting hardness property of dual two-phase intermetallic alloys based on Ni3Al-Ni3V pseudo-binary alloy system[J]. Intermetallics, 2009, 17(11): 938-944. [CrossRef] [Google Scholar]
  2. Kaneno Y, Matsumoto N, Tsuji N, et al. Plasma-assisted surface hardening of dual two-phase intermetallic alloy composed of Ni3X type structures[J]. Materials Science and Engineering: A, 2009, 516(1/2): 84-89. [CrossRef] [Google Scholar]
  3. Moronaga T, Ishii S, Kaneno Y, et al. Aging effect on microstructure and hardness of two-phase Ni3Al-Ni3V intermetallic alloys containing Ta and Re[J]. Materials Science and Engineering: A, 2012, 539: 30-37. [CrossRef] [Google Scholar]
  4. Kawahara K, Moronaga T, Kaneno Y, et al. Effect of Nb and Ti addition on microstructure and hardness of dual two-phase intermetallic alloys based on Ni3Al-Ni3V pseudo-binary alloy system[J]. Materials Transactions, 2010, 51(8): 1395-1403. [CrossRef] [Google Scholar]
  5. Kitaura Y, Kaneno Y, Takasugi T. Effect of NbC addition on mechanical properties of dual two-phase Ni3Al-Ni3V intermetallic alloy[J]. Materials Science and Engineering: A, 2010, 527(21/22): 6012-6019. [CrossRef] [Google Scholar]
  6. Kato H, Semboshi S, Kaneno Y, et al. Effects of iron addition on the microstructures and mechanical properties of two-phase Ni3Al-Ni3V intermetallic alloys[J]. Metallurgical and Materials Transactions A, 2020, 51(5): 2469-2479. [NASA ADS] [CrossRef] [Google Scholar]
  7. Wagle S, Kaneno Y, Nishimura R, et al. Evaluation of the wear properties of dual two-phase Ni3Al/Ni3V intermetallic alloys[J]. Tribology International, 2013, 66: 234-240. [CrossRef] [Google Scholar]
  8. Guo J T, Sun C, Li H, et al. Effect of boron content on the mechanical properties of single-crystal Ni3Al[J]. Journal of Aeronautical Materials, 1992, 12(1): 1-7(Ch). [Google Scholar]
  9. George E P, Liu C T, Pope D P. Intrinsic ductility and environmental embrittlement of binary Ni3Al[J]. Scripta Metallurgica et Materialia, 1993, 28(7): 857-862. [CrossRef] [Google Scholar]
  10. Chang T T, Pan Y C, Chuang T H. The oxidation behavior of Ni3Al-Zr alloys with various zirconium contents[J]. Journal of Alloys and Compounds, 1996, 243(1/2): 126-132. [CrossRef] [Google Scholar]
  11. Lee D B, Santella M L. High temperature oxidation of Ni3Al alloy containing Cr, Zr, Mo, and B[J]. Materials Science and Engineering: A, 2004, 374(1/2): 217-223. [CrossRef] [Google Scholar]
  12. Wu Y X, Gao Q, Hou J S, et al. Influence of Zr on O occupancy behavior in Ni-Ni3V system with different mismatches[J]. Journal of Anhui University of Technology (Natural Science Edition), 2013, 33(4): 326-331(Ch). [Google Scholar]
  13. Wang Z S, Li H X, Yi Y J, et al. Microstructure and wear properties of Ni3Al-Ni3V and Ni3Al-Ni3V(Zr) alloys[J]. Journal of Materials Heat Treatment, 2022, 43(5): 79-87(Ch). [Google Scholar]
  14. Nunomura Y, Kaneno Y, Tsuda H, et al. Phase relation and microstructure in multi-phase intermetallic alloys based on Ni3Al-Ni3Ti-Ni3V pseudo-ternary alloy system[J]. Intermetallics, 2004, 12(4): 389-399. [CrossRef] [Google Scholar]
  15. Nunomura Y, Kaneno Y, Tsuda H, et al. Dual multi-phase intermetallic alloys composed of geometrically close-packed Ni3X (X: Al, Ti and V) type structures—I. Microstructures and their stability[J]. Acta Materialia, 2006, 54(3): 851-860. [NASA ADS] [CrossRef] [Google Scholar]
  16. Li Y F, Guo J T. Environmental embrittlement of Ni3Al(Zr) alloy at high temperatures[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2008, 40(3): 380-384(Ch). [Google Scholar]
  17. Bowden F P, Tabor D. Friction of non-metals[M].The Friction and Lubrication of Solids. Oxford: Oxford University Press, 2001: 161-175. [CrossRef] [Google Scholar]
  18. Alman D E, Hawk J A, Petrovic J J. Abrasive wear behavior of and composites[J]. Scripta Metallurgica et Materialia, 1995, 32(11): 1765-1770. [CrossRef] [Google Scholar]
  19. Zhang Y, Chu W Y, Wang Y B, et al. TEM observation of brittle microcrack nucleation in intermetallic compounds[J]. Chinese Science: Series A, 1994, 24(5): 551-560(Ch). [MathSciNet] [Google Scholar]
  20. Zhang D Z, Zou M D, Xiao J M. Energy analysis of environmentally sensitive brittleness of intermetallic compounds[J]. Journal of Materials Science and Engineering, 1997, 15(1):17-19(Ch). [Google Scholar]
  21. Priyotomo G, Kaneno Y. The effect of annealing temperatures after thermomechanical process to the corrosion behavior of Ni3(Si, Ti) in sulfate solution[J]. International Journal of Science and Engineering, 2015, 8: 141-145. [Google Scholar]
  22. Wang R M, Li C Z, Ping D H, et al. Microanalytical study of the hexagonal phase in an yttrium-containing low expansion superalloy[J]. Materials Science and Engineering: A, 1998, 241(1/2): 83-89. [CrossRef] [Google Scholar]
  23. Zhang D Z, Xiao J M. Environmental embrittlement of intermetallic compounds[J]. Materials Science and Engineering, 1998, 16(2):14-18. [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.