Open Access
Wuhan Univ. J. Nat. Sci.
Volume 28, Number 4, August 2023
Page(s) 341 - 350
Published online 06 September 2023
  1. Bai Z L. Study on Preparation of Sodium Carboxymethyl Cellulose and Sodium Carboxymethyl Starch from potato Starch Residue [D]. Lanzhou: Lanzhou University, 2011(Ch). [Google Scholar]
  2. Tao S, Feng S H, Chen G, et al. Synthesis of sodium carboxymethyl cellulose using bleached crude cellulose fractionated from cornstalk [J]. Biomass and Bioenergy, 2017, 105: 51-58. [CrossRef] [Google Scholar]
  3. Liu L, Zhang M Y, Shen Q F. Synthesis of carboxymethyl cellulose and its application in papermaking [J]. Southwest Pulp and Paper, 2005(4): 37-39(Ch). [Google Scholar]
  4. Zhou K, Yang J, Yang L, et al. Research advances related to heat-not-burn cigarette aerosol [J]. Acta Tabacaria Sinica, 2017, 23(5): 121-129(Ch). [Google Scholar]
  5. Liu H, Fei T, Zheng S J, et al. Recent advances in effects of cigarette paper characteristics on release of harmful components in mainstream cigarette smoke [J]. Tobacco Science & Technology, 2017, 50(4): 93-102(Ch). [Google Scholar]
  6. Kang D, Zhao H, Liu Y S, et al. Development status and prospect of new tobacco products [J]. Science and Technology & Innovation, 2020(6): 87-89(Ch). [Google Scholar]
  7. Zhang Y Y, Tang T T, Zhang J L, et al. Development status and prospect on heating non-combustible reconstituted tobacco [J]. China Pulp & Paper Industry, 2020, 41(18): 14-17(Ch). [Google Scholar]
  8. Liu J Q, Zhao F Q, Li P X, et al. Preparation of new adhesive for tobacco sheet [J]. Advanced Materials Research, 2012, 466/467: 137-140. [CrossRef] [Google Scholar]
  9. Wei P, Gao S, Li G H, et al. Carboxymethylated wood fibers for rolled reconstituted tobacco sheet as a reinforcing phase [J]. China Pulp & Paper Industry, 2021, 40(7): 78-86. [MathSciNet] [Google Scholar]
  10. Alizadeh Asl S, Mousavi M, Labbafi M. Synthesis and characterization of carboxymethyl cellulose from sugarcane bagasse[J]. Journal of Food Processing & Technology, 2017, 8(8): 1000687. [CrossRef] [Google Scholar]
  11. Pushpamalar V, Langford S J, Ahmad M, et al. Optimization of reaction conditions for preparing carboxymethyl cellulose from sago waste [J]. Carbohydrate Polymers, 2006, 64(2): 312-318. [CrossRef] [Google Scholar]
  12. Meiland M, Liebert T, Heinze T. Tailoring the degree of polymerization of low molecular weight cellulose[J]. Macromolecular Materials and Engineering, 2011, 296(9): 802-809. [CrossRef] [Google Scholar]
  13. Shao Z Q. Cellulose Ether [M]. Beijing:Chemical Industry Publishing House, 2007(Ch). [Google Scholar]
  14. Zeng Y F. Research and Application of Rheological Properties of Polymer [D]. Chengdu: Chengdu University of Technology, 2018(Ch). [Google Scholar]
  15. Deng T, Tuo S X, Yang H W, et al. Online analysis of aerosol components of heated tobacco products by GC-MS [J]. Tobacco Science & Technology, 2021, 54(7): 51-58(Ch). [Google Scholar]
  16. Chen H F, Jiang X Y, Meng H L, et al. Preparation of sodium carboxymethyl cellulose with high degree of substitution and low viscosity by poplar pulp board [J]. Applied Chemical Industry, 2019, 48(7): 1587-1591(Ch). [Google Scholar]
  17. Guo J, Song X F, Bai J S, et al. Study on reaction technologic condition for carboxymethyl cellulose [J]. China Adhesives, 2009, 18(9): 38-41(Ch). [Google Scholar]
  18. Cai Z H, Wu J, Du B Q, et al. Impact of distribution of carboxymethyl substituents in the stabilizer of carboxymethyl cellulose on the stability of acidified milk drinks [J]. Food Hydrocolloids, 2018, 76: 150-157. [CrossRef] [Google Scholar]
  19. Bai X L, Huo H, Meng Y F, et al. Thermal quality of reconstituted tobacco sheets [J]. Journal of Beijing Normal University (Natural Science), 2010, 46(6): 696-699(Ch). [Google Scholar]
  20. Wang W S, Wang Y, Yang L J, et al. Studies on thermal behavior of reconstituted tobacco sheet [J]. Thermochimica Acta, 2005, 437(1-2): 7-11. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.